Advertisement
fig.4
fig.5
5. operation
5.1.
Fitting the hose
5.1.1. Attach the hose to the angled hose connection (13) and wind it onto the reel taking care to guide the hose from one side of the reel to
the other to prevent bunching of the hose.
5.1.2. Attach the supply hose to the fixed hose connection (12).
5.2.
extending the hose.
5.2.1. firmly hold the trolley and pull the hose from the reel. Pulling the hose directly from the reel may cause the hose trolley to tip over.
5.3.
retracting the hose.
5.3.1. When retracting the hose, always make sure the water supply is turned off, make sure there is plenty of space to perform the task.
free the hose's path of any obstructions and check for kinks in the hose before reeling in.
5.3.2. rotate the crank handle (10) clockwise whilst firmly holding the trolley taking care to guide the hose from one side of the reel to the
other to prevent bunching of the hose.
6. storage
6.1.
storage
Prior to storing the hose and reel, ensure that the water supply is turned off and any accessories are disconnected. Drain as much
water from the hose as possible. Place in a dark, safe, dry, childproof location, where the hose will be protected from frost.
parts support is available for this product. to obtain a parts listing and/or diagram, please log on to www.sealey.co.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFormation: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
4.4.
4.4.1 fit the crank handle (10) through the right hand side stand holder (2) and
4.4.2. screw the crank handle nut (11) onto the threads of the crank handle (10)
4.5.
4.5.1 fit the angled hose connection (13) through the reel end (6) and the left
4.5.2. Screw the fixed hose connection (12) onto the threads of the angled hose
uk, email sales@sealey.co.uk or phone 01284 757500.
sole UK distributor, sealey group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
iP32 7Ar
Original Language Version
Attaching the crank handle. Refer to fig.4
through the reel end (6) so that the threaded portion protrudes from the
reel end (6).
and tighten.
Attaching the hose connections. Refer to fig.5
hand side stand holder (1) so that the threaded portion protrudes from the
left hand side stand holder (1).
connection (13) and tighten. the hose trolley is now ready for use.
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
GH60
issue: 1 - 21/10/11
Advertisement
