Sealey GSA03 Instructions

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
 Follow all workshop safety rules, regulations, and conditions when using wrench.
 WARNING! Disconnect from air supply before changing accessories or servicing.
 Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
 WARNING! Check correct air pressure - 90psi - is maintained and not exceeded.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 Remove ill-fitting clothing. Remove ties, watches, rings and other loose jewellery and
contain long hair.
 WARNING! Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
 Keep children and unauthorised persons away from the work area.
 Keep the work area clean and tidy and free from unrelated materials. Ensure that
there is adequate lighting.
 Avoid unintentional starting.
 Only use impact sockets which are specifically designed for use with an impact wrench.
 DO NOT use worn or damaged sockets.
 DO NOT use the wrench for a task it is not designed to perform.
 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
 DO NOT use wrench unless you have been instructed in its use by a qualified person.
 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating
medication.
 DO NOT carry wrench with your hand on the power trigger, to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
DO NOT leave the wrench operating unattended.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION & SPECIFICATION
Fitted with reliable low vibration pin-clutch mechanism.
Handle exhaust reduces noise output and limits the
circulation of brake dust on wheel applications. Soft-grip
handle gives added comfort and control. Features
three-position adjustable air/torque control and reversible
action. Suitable for garage, tyre shop and workshop
applications.
INSTRUCTIONS FOR:
GENERATION SERIES AIR IMPACT
WRENCH 1/2"Sq DRIVE PIN CLUTCH
MODEL No: GSA03
Original Language Version
GSA03 Issue: 2 - 12/12/11