Harken 394 Installation Sheet

I N S T A L L A T I O N S H E E T
N15W24983 Bluemound Road • Pewaukee, WI 53072 U.S.A.
Strictly follow all instructions to avoid an accident, damage to
your vessel, personal injury or death. See www.harken.com
for additional safety information.
Use provided line to tie clew hook to
boom with open end of hook point-
ing to port (see photo below). Wrap
line around boom and through clew
hook three times. Tie a very tight
"square knot." Tape ends close to
knot. Line may stretch with time. Retie
as needed. Lead outhaul line through
closed loop of hook as shown at right
and lead the outhaul line down the
starboard side as shown at right.
394, 433 Dinghy Clew Hook
Telephone: (262) 691-3320 • Fax: (262) 701-5780
Web: www.harken.com • Email: harken@harken.com
Install Dinghy Clew Hook
Hook-/Unhook Sail
Hooking Sail: Ease vang
and outhaul. Lift boom and
pass hook through clew
grommet. First trim outhaul
and then vang.
Un-Hooking Sail: Ease vang
and outhaul. Lift boom with
your right hand and push
hook out with your left hand.