Wiring - Toro TS120 Operating Manual

5.5 Wiring

The laid 2-core wire is installed for the electrical connection of the TS120 Impact Sprinkler.
The wire is pulled through the right or left opening on the bottom of the housing into the
solenoid compartment.
8
Use one of the drain holes
to pull the control wires
into the sprinkler.
Use a Direct Bury Splice Kits (Toro part number
DBRY-100) to connect the control wire to the
solenoid fitted inside the sprinkler.
Open the cover of the control module
compartment and connect the solenoid wire.
Use a waterproof connector kit for the connection.
Return the wires into the solenoid compartment
and close the cover.