Zte Warp Connect Manual

Sfl broadband

Hide thumbs Also See for Warp Connect:

Getting Up and Running with Your

The ZTE Warp® Connect Hotspot (SFL Mobile Hotspot) has been activated and tested, by SFL Broadband staff,

prior to being shipped. By following the instructions below, you should be able to easily prepare, and connect

to, the hotspot to begin accessing the internet for educational purposes. Up to 8-10 wireless computing devices

(depending on usage) can be connected to the SFL mobile hotspot at one time. The user of each wireless

computing device that will be connecting to the hotspot will need to be provided with the device name and

password. (Note, this is a one-time set-up process; the computing device will recognize the hotspot in the future

and automatically connect to it.)

Your SFL Mobile Hotspot Features

*Keep the original box for future returns/exchanges.

Before You Start

a. Insert the USB cable into the charging adapter.

b. Insert the small end of the USB cable into the charger/USB port at the bottom of the device.

c. Plug the charging adapter into a standard AC power outlet.

REV 6-29-2017

ZTE Warp® Connect Hotspot

Page 1 of 3

Table of Contents

Do you have a question about the Warp Connect and is the answer not in the manual?

Page 1: Before You Start
Getting Up and Running with Your ZTE Warp® Connect Hotspot The ZTE Warp® Connect Hotspot (SFL Mobile Hotspot) has been activated and tested, by SFL Broadband staff, prior to being shipped. By following the instructions below, you should be able to easily prepare, and connect to, the hotspot to begin accessing the internet for educational purposes.
Page 2: Get Connected
2. Get Ready a. Make sure you are in an area covered by the Sprint Mobile network (not roaming). Check your location on the Sprint coverage map: http://coverage.sprint.com/IMPACT.jsp b. Make sure the computing device you are trying to connect to your SFL mobile hotspot has its Wi-Fi (wireless network connection) mode turned on.
Page 3 SFL Customer Support. The PTN can be found on the back of the device.) For additional information on the SFL ZTE Warp® Connect hotspot, please reference the hotspot’s User Guide posted on our website, at http://www.sflbroadband.org. (Please note, these user guides were created for Sprint’s retail customers and not for SFL Broadband’s “spectrum education Participants.”)