Connecting Peripheral Equipment; To Select Connected Equipment - Philips 32DW6558/05 User Manual

Philips digital widescreen tv 32dw6558 81 cm (32") integrated digital with crystal clear iii
Hide thumbs Also See for 32DW6558/05:
Table of Contents

Advertisement

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorder
EXT 2
Other equipment
EXT 1
Side connections
4
5
6
7
8
9
0
Á
Ø
Video recorder (only)
Carry out the connections featured opposite.To record digital
programmes from your TV, the VCR must be connected to EXT2.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 12).
To reproduce the video recorder picture, press
will not be possible to record digital channels.
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Satellite receiver, decoder, DVD, games, etc.
Carry out the connections featured opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the S-VHS
signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1
or EXT2.
Carry out the connections featured opposite.
n
Using the
camcorder and S-VHS3 for an S-VHS or Hi-8 camcorder.
For a mono set, connect the sound signal to the AUDIO L
(or AUDIO R) input.The sound automatically comes out of the
left and right speakers of the TV .
S-VHS, Hi-8
Headphones
@ " #
The
VHS, 8 mm
the headphones and on the set. Press
off the sound on the set.
The headphones must have an impedance of between 32 and
600 ohms.

To select connected equipment

n
Press the
key to select EXT1, EXT2, S-VHS2 (S-VHS signals from
the EXT2 socket) and EXT3 or S-VHS3 for connections on the side
panel.
Most equipment (video recorder, etc) carries out the switching automatically.
key, select EXT3 for a VHS or 8mm
keys allow you to adjust the volume on
m
0
. In this case it
if you want to cut
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

28dw6558/0528dw655832dw6558

Table of Contents