System - Gigaset A690 Manual

Phone settings

System

Changing the system PIN
¤
Menu Settings
current 4-digit system PIN (default: 0000)
Resetting the system PIN
Resetting the base to the original PIN code 0000:
¤
Unplug the network cable from the base
the base at the same time reconnect the network cable to the base
key for at least 5 seconds . . . the base is reset and the system PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are reset to the
defaults.
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the handset's registra-
tion to the base, are maintained.
¤
Menu Settings
OK
Resetting the base
A reset disables mode No Radiation , , resets individual settings and deletes all lists.
The system PIN is reset to the original code 0000.
The time and date are not affected. The answer machine (if available) is not ready until after
about 15 seconds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
¤
Menu Settings
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code 0000.
¤
Unplug the power cable from the base
base At the same time, reconnect the power cable to the base
for at least another 5 seconds
36
OK Base OK
OK
press and hold the Registration / paging key on
OK Handset
OK Base OK
Keep pressed the Register/Paging key on the
System PIN
Enter the new 4-digit system PIN
OK Reset Handset
Base Reset
Keep the key pressed
OK Enter the
press and hold the
OK Reset?
OK Reset? OK
OK