Process Profile Parameters - JOVY Systems Jetronix-Eco Operating Manual

[Jovy Systems Limited]
[Jetronix-Eco]
4.2

Process Profile Parameters

4.2.1 Create
Jetronix-Eco Process Profile divided into optional 1 to 4 stages, user can
create a process profile of at least 1 stage. Preheat stage is preprogramed
and heaters power predefined, while the other user define the hetars power
for each zone.
From Main Menu choose Profiler
. Then, create a profile
The first screen
preprogramed (preheat) stages needed, press ON. If the process profile
stages all to be defined by user, the Preheat stage should be
OFF
The required inputs for pre heat stage is the stage ends temperature and
dwell time needed at this temperature
Page 16 of 22
.
to Define the process profile stages, if the
©Jovy Systems 2013. All rights reserved
Operating Manual
[Version 1.01]
and press Enter
.
Jetronix-Eco Operating Manual