Advertisement
MOUNTING INSTRUCTIONS
Step 1.
Take the front left under platform support bracket and position under the
platform. Fasten into place with two 3/8" x 1 ½" hex bolts and nuts into the side
of the operator platform.
_________________________________________________________
Step 2.
Repeat for the right under platform bracket support bracket.
_________________________________________________________
Step 3.
Lift the modular ROPS off of the shipping pallet with an over head hoist.
_________________________________________________________
Step 4. Slowly lower the ROPS onto the machine, and get the rear bracket over the 2-
post ROPS first.
_________________________________________________________
Step 5. Take the rear bracket and fasten to the modular ROPS in order to secure the
rear position first. Use the provided M12 fasteners.
_________________________________________________________
Step 6.
Use the remaining 3/8" fasteners and bolt the front mount to the platform through
the support brackets installed earlier.
_________________________________________________________
Step 7.
Torque all fasteners to recommended specifications.
_________________________________________________________
8
Advertisement
