Toro ROPS Reelmaster 5210 Mounting Instructions page 7

DECALS
1. Keep decals clean. Remove dirt with a wet clean cloth when necessary.
2. Replace safety decals if destroyed, missing, painted over or unreadable. If the tractor
safety decals are covered or obscured when the cab is mounted, purchase replacement
decals from the tractor manufacturer. Mount them in a readable location at, or near, their
original location before operating the tractor.
3. New cab decals and tractor decals are available from your Toro distributor/dealer.
The resulting noise levels when
using this product will exceed
OSHA standards for an 8 hour
workday and hearing protection
with a Noise Reduction Rating
(NRR) of 22 or higher is
required.
7
CAUTION