Philips 62PL9774/37B Directions For Use Manual page 21

Remote Control Buttons
INFO
SELECT PIXEL PLUS
SURR
TV CC HD
SCREEN
FORMAT
SURF
®
® ®
®
PIP
MUTE
AV+
ACTIVE
CLOCK
SAP CONTROL
Standby–On
Press to turn the TV on or off.
NOTE: The TV is never powered off completely unless it is physically
unplugged from the power source.
Pixel Plus™ Demo
Press to activate the demo, which illustrates the benefits of Pixel Plus™.
Press again to turn the demo off. Press and the TV screen will be divided
in half displaying the Pixel Plus™ Demo. The left side will show the pic-
ture with Pixel Plus™ switched off. The right side of the screen will
show the picture with Pixel Plus™ switched on. (See page 30 in the
Directions for Use manual.)
VCR/DVD Functions
When the remote is in the VCR mode, these buttons will allow you start
a recording (G), rewind a tape (
play a videotape ( ), or fast-forward a videotape (
HD
Press to activate the AV6 (High Definition) jacks and place the TV in the
High Definition Mode of operation.
Surround Sound
Press to display a list of available sound modes. Choose from Incredible
Surround™ and Dolby* Virtual settings. (See page 41)
Screen Format
Press to display a list of available picture formats for showing video
images in the traditional 4:3 proportions. Press this button repeatedly to
select a picture format. Choose from Automatic, Super zoom, Panoramic,
4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle, and Wide
screen. See pages 35–36 in the Directions for Use manual.
NOTES:
• With AV3–AV6 connections, the Automatic picture
format option is not available.
• In Dual Screen mode, press the Screen Format button to switch
between a full or 4:3 letterbox picture format.
Cursor Up, Down, Right, Left
Use to navigate the on-screen menu and make control adjustments or set-
tings.
Additionally, use these buttons to pan the screen up or down to show any
excluded parts of the picture.
Menu On/Off
Press to display the TV's on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two- or three-digit
channel, enter all numbers. Press a single- digit button and hold a bit
longer to directly access a single-digit channel. These buttons can also be
used to enter values in certain on-screen menu controls.
Time Display (Clock)
Press to display the current time on the TV screen. (See page 64 in the
Directions for Use manual to set the clock)
21
), stop the playback of a tape (I),
).