Connecting A Standard Dvd Player - Philips 62PL9774/37B Directions For Use Manual

Hdtv monitor with pixel plus

Hide thumbs Also See for 62PL9774/37B:

Quick use and setup manual (8 pages)

Table Of Contents

Table of Contents

Using Audio/Video cables, connect to

the YPbPr jacks on the back of the

standard DVD player and to the AV1

YPbPr jacks on the back of the TV.

Using Stereo Audio cables, connect to

the AUDIO OUT jacks on the back of

the DVD player and to the correspon-

ding AV1 audio (L and R) jacks on the

back of the TV.

Press the Source (AV+) button on the

remote control to access the Source

list.

Press the Cursor Up or Down button to

select the AV1 input source.

Press the OK button to confirm your

choice. The set is now switched to the

AV1 input source for the viewing of pro-

grams from the DVD player.

ELPFUL

• If you do not know whether your DVD

player is standard or progressive scan, you

can connect it to either AV3 or AV4, and the

TV will automatically determine the type of

output.

• To simplify making connections, the con-

nectors on audio and video cables are often

color coded to match the colors on TV

jacks: green for Y, blue for Pb, and red for

Pr; also red for right audio, and white for

left audio.

• The names for the component video jacks

may differ depending on the DVD player or

accessory digital source equipment used.

For example, besides YPbPr, you may see

R-Y/B-Y/Y; or CrCbY. Although abbrevia-

tions and terms may vary, the letters B and

R stand for the blue and red color compo-

nent signal connectors, respectively, and Y

indicates the luminance signal. If necessary,

refer to the user manual for your DVD or

digital accessory for more information.

• If you experience difficulties receiving

sound with a DVD disc, check the sound

settings through the DVD disc's menu.