Resetting The Lamp's Lifetime Counter - Philips 62PL9774/37B Directions For Use Manual

Hdtv monitor with pixel plus

Hide thumbs Also See for 62PL9774/37B:

Quick use and setup manual (8 pages)

Table Of Contents

Table of Contents

After installing a new lamp in the TV, you

need to enter the "Lamp rating" list in the on-

screen menu and select the alphabetical code

that is provided with the lamp. The recom-

mended Philips replacement Lamp is rated

for 6000 hours, an F rating

The next step is to use the "Lamp replaced

control" to tell the TV that you have installed

a new lamp. This control resets the Lifetime

Counter to 0 for the new lamp and begins

keeping track of the lifetime of the new lamp.

Press the Menu button on the remote

control to display the on-screen menu.

Press the Cursor Down button to select

"Settings."

Press the Cursor Right button to select

the "General" menu.

Press the Cursor Down button repeat-

edly until "Lamp rating" is selected.

Press the Cursor Right button to enter

the rating list.

If necessary, press the Cursor Down

button as many times as necessary to

select the letter for your replacement

lamp.

Press the Cursor Left button to return

to the "General" menu.

Press the Cursor Down button to select

"Lamp replaced."

Press the OK button to confirm that

you have changed the lamp.

Press the Menu button to remove the

on-screen menu from the TV screen.

ELPFUL

• One hundred hours before the lamp

reaches the end of its life, a warning

message will appear on screen to alert

you. Changing the lamp at this point is

recommended for optimal performance.

• A blinking orange light on the front of

the set means that the lamp is not work-

ing anymore and needs to be replaced.