Turning The Antenna Attenuator On Or Off - Philips 62PL9774/37B Directions For Use Manual

Hdtv monitor with pixel plus

Hide thumbs Also See for 62PL9774/37B:

Quick use and setup manual (8 pages)

Table Of Contents

Table of Contents

If you live near a television station's transmit-

ter tower, you may receive an interfering sig-

nal from the station while watching other TV

channels. Your television's Antenna

Attenuator control is designed to reduce the

strength of such a signal in the presence of a

strong main signal. The default setting for the

Antenna Attenuator is "Off." If you need to

use the feature, simply toggle it "On" in the

on-screen menu. The setting you make

applies to the channel you are currently

watching and will remain in place until you

change the setting.

Press the Menu button on the remote

control to display the on-screen menu.

Press the Cursor Right button repeat-

edly to select "Channels."

Press the Cursor Down button repeat-

edly to select the "Antenna attenuator"

control.

Press the Cursor Right button to toggle

the control "On" or "Off."

Press the Menu button to remove the

on-screen menu from the TV screen.