Servicing
4.2.3 Exchanging the driver
- Fig. 28 -
The driver can be used twice (only with normal stitching). If one side is damaged or deflected, the
driver can be turned round.
- Slightly press in gripping yoke
turn through 90° to the left (anticlockwise) and tilt upwards.
- Remove former
to the front.
- Unscrew the two threaded bolts
in the driver
and pull out driver downwards.
Installation is performed in the inverse order.
Hohner Maschinenbau GmbH
HK 52/8 S
49