Lubrication; Lubricants; Lubrication Plan - Hohner UNIVERSAL 52/8 S Operating Instructions, Spare Parts List, Special Staples, Options

4.1 Lubrication

- Fig. 22 -
After approx. 50 operating hours, the stitching head must be lubricated with the lubricants
described below.
After approximately 50 operating hours the felt disks of the wire feed spring must also be slightly
lubricated with the lubricant indicated.
If the stitching head is not regularly lubricated, greater wear will occur, the service life of the
stitching head will be considerably decreased and premature failure of the stitching head may
occur.

4.1.1 Lubricants

Lubricating grease for guideways and friction points:
High temperature high performance grease
Recommendation: ELKALUB GLS 163 (250 gr.) – Order No. 96 90 021
Oil for felt disks:
Guideway oil with viscosity class 65-70 (ISO- viscosity class in accordance with DIN 51 519).

4.1.2 Lubrication plan

Date Operating hours
status - display on
stitching unit
Hohner Maschinenbau GmbH
Oil or grease used
HK 52/8 S
Servicing
Performed by:
Name
Signature
43