Exchangeable Parts - Hohner UNIVERSAL 52/8 S Operating Instructions, Spare Parts List, Special Staples, Options

3.10.1 Exchangeable parts

- Fig. 20 , Fig. 20a , Fig. 20b -
To change over from standard stitching to loop stitching, a set of exchangeable parts,
art. no. 0522 940 is required, consisting of:
Bender -L6-, cpl. Art. no. 9963 408
Former -L6-, cpl. Art. no. 9963 410
Former lever -L- Art. no. 9963 840
Or a set of exchangeable parts loop stitch L7,
Art.-no. 0522 944, consisting of:
Bender -L7-, cpl. Art.-no. 9963 458
Former -L7-, cpl. Art. no. 9963 455
Former lever -L- Art. no. 9963 840
Or a set of exchangeable parts loop stitch L8,
Art.-no. 0522 942, consisting of:
Bender -L8-, cpl. Art.-no. 9963 458
Former -L8-, cpl. Art. no. 9963 455
Former lever -L- Art. no. 9963 840
Hohner Maschinenbau GmbH HK 52/8 S
Operation
39