Advertisement
Assembling Base Around Machine
If your machine is oddly shaped or too heavy to
lift into the mobile base, you can assemble the
mobile base around your machine as an alternate
option for assembly. Always have an assistant
stabilize the machine during mobile base
assembly.
Items Needed
Additional Person .............................................. 1
Open-End Wrench 13mm .................................. 1
Socket Wrench 13mm ....................................... 1
12" 4x4 Block ..................................................... 1
12" 2x4 Block ..................................................... 1
To assemble mobile base around machine:
1.
Install foot pedal plunger and spring into each
front corner bracket (see Figure 12), and
attach a rubber foot (with M10-1.5 hex nut) to
the bottom of each foot pedal plunger.
Foot Pedal
Plunger
Figure 12. Installing foot pedal plunger and
spring.
2.
Attach each foot pedal to front corner bracket
using (1) M8-1.25 x 52 shoulder bolts and (1)
M8-1.25 lock nuts (see Figure 13).
Foot
Pedal
Figure 13. Attaching foot pedal to corner.
T28000 T28922 T28923 (Mfd. Since 11/18)
Qty
Spring
Rubber
Foot
3.
Insert one side rail into the two front brackets,
as shown in Figure 14, then slide the bracket
assembly against the side of machine that
will typically be pushed against when moving
the machine.
Corner Brackets
with Rubber Feet
Side Rail
Figure 14. Rail inserted between corner brackets
with rubber feet.
4.
Secure each end of rail to corner brackets
with (2) M8-1.25 x 16 hex bolts, as shown in
Figure 15.
x 2
Figure 15. Rail secured to corner brackets.
x 2
-5-
Advertisement
