Advertisement
Assembling Base &
Mounting Machine
1.
Attach swivel caster to each front corner
bracket using (4) M8-1.25 x 16 hex bolts and
(4) M8-1.25 lock nuts (see Figure 4).
Hex Bolt
(1 of 4)
Lock Nut
(1 of 4)
Front
Corner
Bracket
Figure 4. Swivel caster attached to front corner
bracket.
2.
Install foot pedal plunger and spring into
each front corner bracket (see Figure 5), and
attach a rubber foot (with M10-1.5 hex nut) to
the bottom of each foot pedal plunger.
Foot Pedal
Plunger
Figure 5. Installing foot pedal plunger and
spring.
T28000 T28922 T28923 (Mfd. Since 11/18)
Swivel
Caster
Spring
Rubber
Foot
3.
Attach foot pedal to each front corner bracket
using (1) M8-1.25 x 52 shoulder bolt and (1)
M8-1.25 lock nut (see Figure 6).
Foot
Pedal
Figure 6. Attaching foot pedals.
4.
Attach fixed caster wheels to each rear cor-
ner bracket using (1) M10-1.5 x 55 shoulder
bolt and (1) bearing sleeve (see Figure 7).
Fixed Caster Wheel
Figure 7. Fixed caster wheel installed on rear
corner bracket.
5.
Orient fixed casters in same direction
machine will typically be moved (see Figure
8). Mounting fixed casters in wrong direc-
tion will make it difficult to move mobile base
around in small spaces.
(TOP VIEW OF CASTER)
Typical Direction of Movement
CORRECT
Figure 8. Orientation of fixed casters for easy
machine movement.
INCORRECT
-3-
Advertisement
