Settings; Setting The Alarm - Silvercrest SDR 1.5 A1 Operating Instructions And Safety Instructions

9.12 Settings

This menu allows you to configure further settings. Press and hold the INFO /
MENU button (2) for approx. 2 seconds to enter the menu. Within the menu,
you can navigate with the I◂◂ (6) and ▸▸I (7) buttons. Press the OK / AMS
button (8) briefly to confirm your selection. To go back one step in the menu,
press the INFO / MENU button (2) briefly.

9.12.1 Setting the alarm

This menu allows you to set two alarm times. Verify that the clock displays the
correct time.
 Press and hold the INFO / MENU button (2) for approx. 2 seconds.
 In the System menu, use the I◂◂ (6) and ▸▸I (7) buttons to select the "Alarm"
option.
 Press the OK / AMS button (8) briefly.
 Use the I◂◂ (6) and ▸▸I (7) buttons to select the "Alarm 1" or "Alarm 2"
option.
 Press the OK / AMS button (8) briefly.
 The hour display flashes and you can now use the I◂◂ (6) and ▸▸I (7) buttons
to set the hour of your alarm time. You can keep the buttons pressed to
accelerate the digits count. Press the OK/ AMS button (8) briefly to apply the
setting.
 The minute display flashes and you can now use the I◂◂ (6) and ▸▸I (7)
buttons to set the minutes of your alarm time. You can keep the buttons pressed
to accelerate the digits count. Press the OK/ AMS button (8) briefly to apply
the setting.
 You can now set how long the alarm will sound by pressing the I◂◂ (6) and
▸▸I buttons (7). The following options are available: "15 minutes", "30
Minutes", "45 Minutes", "60 Minutes" and "90 Minutes". Press the OK/
AMS button (8) briefly to apply the setting.
SilverCrest SDR 1.5 A1
English - 21