Installing Your Television Set; The Keys On The Tv Set - Philips 34PT8845/69 User Manual

Installing your television set

Positioning the television set
10 cm
10 cm
Place your TV on a solid, stable surface,
leaving a space of at least 10 cm around the
appliance.
Connections
• Insert the aerial plug into the
at the rear of the set.
If you are using an indoor aerial, reception
may be difficult in certain conditions. You
can improve reception by rotating the
aerial. If the reception remains poor, you
will need to use an external aerial.
• Insert the mains plug into a wall socket.

The keys on the TV set

The television set has 4 keys which are
located in front.
On some models, the keys
are located at the top of the set.
Remote control
10 cm
Insert the two AA-sized batteries (supplied)
making sure that they are the right way
round.
The batteries supplied with this appliance do
not contain mercury or nickel cadmium.
If you have access to a recycling facility, please do
not throw away your used batteries (if in doubt,
consult your dealer).
Switching on
socket
To switch on the set, press the on/off key.
A red indicator means that the television is on
standby mode. Refer to the next page on 'Remote
Control keys' for the various keys that you can
use to switch on the set. An indicator light will
flash when it is receiving signal from the remote
control.
The VOLUME – + keys are used to adjust the
sound louder or softer.The CHANNEL v ^
keys are used to change the channels.
To access or exit the main menu, press down
the VOLUME – + keys, simultaneously.
To select an item in the main menu, press the
CHANNEL v or ^ key.
To select an adjustment, press down the
VOLUME – or + key.
4