Presentation Of The Lcd Television; Installing Your Television Set - Philips 23PF9937 Directions For Use Manual

5 ¢m
_Scm
5 cm
0 Positioning
the television set
Placeyour TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g.lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear.
0 Connecting the aerials
• Use the aerial connection lead supplied and
connect the -It" socket situated at the bottom of
the TV to your aerial socket.
• Insert the radio aerial lead supplied into the FM
ANT socket located at the bottom of the T_
• Arrange the leads by passingthem through the
television stand.
0 Power supply connections
TheTV works with a DC supply (the voltage is
indicated on the label). Only use theAC-DC
adaptor supplied with theT_L
• Connect the DC plug of the adaptor to the TV DC
socket. Leavea space round the adaptor for
ventilation.
• Insert the adaptor power lead and insert the mains
plug into the wall socket.
For connecting other appliancessee page p.14.
O Remote control
Insert the two R6-type batteries supplied, making
sure they are the right way round.
The batteries supplied with the appliance do not
contain mercury or nickel cadmium so as to protect
the environment. Pleasedo not discard your used
batteries, but use the recycling methods available
(consult your distributor).
0 Switching on
To switch on the set, press the on/off key. A green
indicator comes on and the screen lights up. Go
straight to the Quick Installation chapter on page5.
tf the TV remains in standby mode(red indicator),
press the P (_ key on the remote control.
Theindicatorw_ll_ashwhen you use the remote control.