Specifications - GBC ORCA-I Operation Manual

ORCA-I Operation Manual
6HFWLRQ  7HFKQLFDO ,QIRUPDWLRQ
6SHFLILFDWLRQV
Table 6-1. ORCA-I Laminator Specifications
Characteristic

Specifications

Dimensions 75" x 37" x 56"
(L x D x H) (1.91 x .94 x 1.42 m)
Weight Uncrated: 1425 lbs (646 kg)
Crated :1775 lbs (805 kg)
Laminating Rolls 61" (155 cm) roll face with high
release surface, upper and lower
rolls internally heated
Laminating Opening 1.5" (3.8 cm) maximum opening
Laminating Material Uses heat activated and
pressure-sensitive materials 0 -
55" (0 - 140 cm) wide on a 3"
(7.6 cm) ID core, 10" (25.4 cm)
maximum diameter
Laminating Speeds 0 to 14 fmp (o to 4.3 mpm) with
variable speed, reversible action,
start and stop controlled either
through the instrument panel or
with the footswitch
Encapsulating Features Pull rolls and cooling fans for
uniform flat cooling
•
Safety Features
•
•
•
Options
•
Installation USA: 220-240 VAC, 50/60 Hz,
Requirement 55A, single phase 3 wire.
Europe: 230/400 VAC, 3-N
phase, 50 Hz, 25A per phase.
Air: 2 cfm at 100 psi, minimum
(0.5 m
© GBC Pro-Tech 1997 October
Photoelectric eyes prevent
laminating roll movement
when hands are in the nip
area
All electrical and moving
mechanical parts are
located in bolted cabinets
Two emergency stop
buttons and two emergency
kick cables
Outfeed Slitters
Outfeed Table
3
at 758 vPa)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Technical Information
6-1