Saving To Memory - Boss DD-200 Owner's Manual

Saving and Switching Memories

Saving to Memory

Here's how to save delay settings that you edited.
1.
Long-press the [MEMORY] button.
The display indicates "Wrt. "
2.
Press the [MEMORY] button to select the save-
destination (MAN, 1–4).
If you decide to cancel, press the [TAP DIVISION]
button.
3.
Long-press the [MEMORY] button to confirm
the save-destination.
The memory is saved.
* If you save to MAN, the settings of the panel are applied as the
values for MODE, FEEDBACK, E.LEVEL, PARAM, TONE, and MOD
DEPTH.
8
Switching Memories
Here's how to recall a saved memory.
1.
Press the [MEMORY] button to select a
memory.
Each time you press the button, you cycle through
the memories in the order of "MAN (manual) 0 1
0 2 0 3 0 4 0 MAN... "
What is "MAN" (manual)?
If you select "MAN, " the delay is heard using settings that
reflect the actual positions of the knobs. The delay time
and TAP DIVISION use the settings that you wrote into
memory.