Inserting & Removing Apollo - IntriCon Hearing Help Express Apollo-6200 Hawk User Manual

Inserting & removing Apollo hearing aid
How to insert the Apollo:
1. Grasp the slim-tubing behind the eartip and
gently push the eartip into your ear canal.
2. Place your Apollo over the top of your ear.
3. The slim-tubing will probably bulge slightly near
the ear canal. Point at the bend in the tubing and
push gently. The eartip should slip a little further
into the ear canal for proper placement. The
tubing should fit snugly against your ear.
Note: If pushing on the slim-tubing causes discomfort, STOP.
Call for assistance. 1-800-221-2099
4. Place the sure-lock into the bowl of
your ear. The sure-lock is the thin
filament attached to the tubing. Use
your finger to secure the sure-lock into
the most comfortable position.
NOTE: Tubing should not bulge away from the ear
or pull the Apollo down or the eartip out of the ear.
If this occurs, try a different length tubing. See picture
to the right.
To Remove Apollo hearing aid:
1. Grasp hold of the slim-tubing against your ear and gently pull.
The eartip will slip out of your ear.
2. Remove the Apollo from behind your ear.
ATTENTION: Confirm the eartip is attached to the slim-tubing each time you
remove it from your ear. If the eartip remains in your ear, seek medical assistance.
1-800-221-2099 • HearingHelp.com
1
2
3
4
7