Table of Contents
Advertisement
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
I
NSTALLING THE UNIT
P
OWER SUPPLY LINE,
FUSE OR CIRCUIT
BREAKER
2
E-
Risk of electric shock. • Can cause injury or death.• Disconnect all remote electric power
supplies before servicing, installing or cleaning. • This must be done by the manu-
facturer or its service agent or a similar qualified person in order to avoid a hazard.
The unit should not be installed by the user. Ask the dealer or authorized company
to install the units except room air conditioners for the U.S.A and Canada area.
If the unit is installed improperly, water leakage, electric shock or fire may
result.
Mount with the lowest moving parts at least 2.5 m above the floor or grade
level. (If applicable)
The manufacturer does not assume responsibility for accidents or injury caused by
an incorrectly installed air conditioner. If you are unsure about installation, contact an
installation specialist.
When installing the built-in type air conditioner, keep all electrical cables such as the
power cable and the connection cord in pipe, ducts, cable channels e.t.c to protect
them against liquids, outside impacts and so on.
If the power cord of this air conditioner is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
The unit must be plugged into an independent circuit if applicable or connect the
power cable to the auxiliary circuit breaker. An all pole disconnection from the
power supply must be incorporated in the fixed wiring with a contact opening of
>3mm.
Do not use an extension cord with this product.
If the unit is equipped with a power supply cord and a plug, the plug must be
accessible after installation.
The air conditioner must be installed in accordance with national wiring regulations
and safety regulations wherever applicable.
Hide quick links:
Advertisement
Table of Contents
