Download Print this page
Tannoy iW 62 BACKCAN Quick Start Manual
Tannoy iW 62 BACKCAN Quick Start Manual

Tannoy iW 62 BACKCAN Quick Start Manual

Pre-install backcan for iw 62ds-wh and iw 62s-wh in-wall loudspeakers

Advertisement

Quick Links

Quick Start Guide
iW 62 BACKCAN
Pre-Install backcan for iW 62DS-WH and iW 62S-WH In-Wall Loudspeakers
IN WALL INSTALLATION
(1) Using screws that are at least ¾ " long, affi x backcan to studs or joists. Tannoy recommends a
minimum of 8 screws.
(2) Run appropriate gauge and type of wire for your particular installation to the backcan location.
½ " or ¾ " conduit is also an option.
(3) Install a suitable connector for wire chosen into the ½ " or ¾ " knock out. Run wire through connector,
leaving enough length to reach the loudspeaker with excess for ease of connection.
(4) Leave excess wire in the backcan until drywall or desired fi nishing is complete.
(5) The fl ange on the front of the backcan will protrude through the drywall and act as a guide for
drywall installation.
(6) After desired fi nishing is complete, connect the previous installed wire in the backcan to the red (+)
and black (-) terminals on the chosen loudspeaker model. An optional ground wire may be used to
reduce RF interference.
(7) Follow installation instructions found in the loudspeaker quick start guide for fi nal speaker installation.
For technical assistance: Tannoy UK +44 1562 732290 or visit our website at tannoy.com.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations,
appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.
(1)
Alignment tags for in wall mounting
(1)

Advertisement

loading

Summary of Contents for Tannoy iW 62 BACKCAN

  • Page 1 Music Tribe accepts no liability for any loss which may be suff ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifi cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.
  • Page 2 62 BACKCAN Dimensions 12.5 mm min 0.49" min 101.6 mm min 4.00" min 451.0mm 17.76" 89.1mm 199.0mm 3.51" 7.83" 1143.0mm 436.0mm 1200.0mm 45.00" 17.17" 47.24" 96.7mm 310.0mm 3.81" 12.20"...