Using In Pc Monitor Mode - Philips 23PF4310/01 User Manual

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer (see
p.13) and adjust the resolution (see below).
Choosing PC mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode ( ).
DVI In
To return to TV mode, press the
and validate with ≥ key.
TV
Using the PC menus
Press the key to access the specific
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
Here is the list of the different PC display resolutions available on your TV:
20"/51cm VGA
(DVI-D)
Digital PC
640 x 350 p
X
640 x 480 p
X
720 x 400 p
800 x 600 p
832 x 624 p
1024 x 768 p
1280 x 768 p
Analogue PC
640 x 350 p
640 x 480 p
720 x 400 p
800 x 600 p
832 x 624 p
1024 x 768 p
.
and
PC
key, select
AV
15"/39cm XGA
(DVI-D)
X
X
X
X
X
X
• Picture:
-
Brightness / Contrast
brightness and contrast.
- : to adjust the horizontal
Horizontal / Vertical
and vertical placing of the image.
- : to adjust the colours (cold,
Colour Temp
normal or warm).
• Audio Selection: to choose the sound
reproduced on the TV (PC/HD,TV or Radio).
• Features (only available on certain versions):
- : eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase Clock
- : to choose between full screen or
Format
native format of the PC screens.
- : position is set automatically.
Auto Adjust
• Reset To Factory Setting: to return to the
factory settings (default settings).
17"/44cm WXGA
(DVI-D)
X
X
X
X
X
X
X
: to adjust the
) interfering lines.
23"/58cm WXGA
(DVI-I/YPbPr)
X
X
X
X
X
X
X
X
X
X
X
X
X
9