Using The Radio; Using In Pc Monitor Mode - Philips Streamium Manual

Using the radio

Choosing radio mode
Â
Press the key on the remote control to
switch the TV to radio mode. Press the
key to return to TV mode. In radio mode the
number and name of the station (if available),
its frequency and the sound mode are
indicated on the screen.
Selecting programmes
ñ ô
Use the / or
- P +
FM stations (from 1 to 40).
Using the radio menus
h
Use the key to access the specific radio
settings.

Using in PC monitor mode

Note:
When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is operated
under electromagnetic interference environment but will not affect the performance of this product. For better
performance, good quality VGA cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.11).
Choosing PC mode
U
Press the key on the remote control to
switch the TV to PC. Press the
return to TV mode.
If there is no PC signal for more than five seconds,
the TV automatically goes into standby mode.
Using the PC menus
h
Press the key to access the specific settings of
the PC monitor mode. Use the cursor to adjust
them (the settings are automatically saved) :
• :
Picture
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
W
keys to select the
W
key to
: to adjust the
: to adjust the horizontal
Searching radio stations
If you have used the quick installation all the
available FM stations will be stored. To start a
new search use the
Install
(for a complete search) or
a station by station search).These menus work
in exactly the same way as the TV menus.
Screen saver
In the menu you can activate / close
Features
the screen saver.
- : to adjust the colours (cold,
Adjust Colour
normal or warm).
• : to choose the sound
Audio Selection
reproduced on the TV (PC or TV/Radio).
For example, you can listen to the radio while
you use the computer.
• :
Features
- : eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase
- : to choose between large screen
View Format
or the original format of the PC screens.
- : position is set automatically.
Auto Adjust
•
Reset To Factory Setting
factory settings (default settings).
• : to come back to TV or radio
Mode Select
mode.
menu :
Auto Store
(for
Manual Store
) interfering lines.
Clock
: to return to the
9