Using In Pc Monitor Mode - Philips 20PFL4101S/60 User Manual

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality DVI cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode (
DVI-I In
To return to TV mode, press the
and validate with ≥ key.
TV
Using the PC menus
Press the
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
Here is the list of the different HD display resolutions available on your TV:
640 x 350
640 x 480
800 x 600
832 x 624
1024 x 768
1280 x 768
10
.
PC
).
key, select
AV
key to access the specific
15"/39cm
XGA
X
X
X
X
X
• Picture:
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical
and vertical placing of the image.
-
Colour Temp
normal or warm).
• Audio Selection: to choose the sound
and
reproduced on the TV (PC/HD or TV).
• Features (only available on certain versions):
-
Phase/Clock
(
Phase
-
Format
native format of the PC screens.
-
Auto Adjust
• Reset To Factory Setting: to return to the
factory settings (default settings).
20"/51cm
VGA
X
X
: to adjust the
: to adjust the horizontal
: to adjust the colours (cold,
: eliminates the horizontal
) and vertical ( ) interfering lines.
Clock
: to choose between full screen or
: position is set automatically.
20"/51cm
WXGA
X
X
X
X
23"/58cm
WXGA
X
X
X
X