Congratulations on your purchase of the NeoPro audio/video matrix switch. The
NeoPro family of matrix switches features component video and both analog
and digital audio signal routing with a variety of features, including:
System Control
Serial control via RS232 or USB ports
•
IR control via front panel sensor or "wired" (back panel)
•
Independent routing of all signal types
•
16 memory locations to store switch configurations and
•
volume/bass/treble levels
IR discrete code control for volume up, down, and mute for all outputs.
•
Two-code discrete IR command for switching
Audio Controls
Volume, Bass, and Treble levels
•
Variable duration volume fade up/down
•
Volume muting
•
High Definition Video
Component video (YPbPr) section bandwidth is 140 MHz for 1080p
•
Digital Audio
Digital audio via SPDIF can also be used for standard video (480p)
•
signals through COAX
Models that have TOSLINK inputs and outputs are switched together
•
with SPDIF
Pass-through Outputs
The pass-through connections are high bandwidth buffered copies of all
•
the input signals, before the matrix switch
These pass-through can be used to connect to an additional matrix,
•
adding another 8 outputs
Up to 12 switches can be stacked to create a full non-blocking 12x96
•
matrix
All models have an attractive enclosure with brushed aluminum and high gloss
acrylic front, and a black top cover. Connectors are gold plated for maximum
signal quality and resistance to corrosion.
(for models with Analog Audio)
(for models with Component Video/YPbPr)
DOC42-00027-C Integrator's Guide.doc
Introduction
5