Table of Contents
Advertisement
[?xB]
Bass levels
[?xT]
T
r
Responses can be re-used as input back to the matrix switch. Queries only
e
respond to valid command types and levels.
b
l
e
When using the USB port, the matrix switch will be installed as a virtual COM
l
port. This means that any control program capable of controlling a device
e
through a normal serial port should be able to control the matrix through a USB
v
port.
e
l
This driver set is for all versions of MS Windows. Linux and Mac drivers can be
s
made available upon request.
The following steps are for Windows XP, but other versions of Windows are
similar.
Step 1 – Connect the USB cable to the matrix and controlling computer.
Windows will detect the new hardware, and launch the plug and play
wizard.
USB Driver Installation
24
DOC42-00027-C Integrator's Guide.doc
Advertisement
Table of Contents
