burroughs SmartSource Micro Elite Setup And Operation page 3

Scanner Access Points
The scanner is fitted with two covers
to provide access to the track mechanism and image cameras.
Image
Cover
Scanner Maintenance
•
As required, the scanner should be cleaned to remove
accumulated paper dust and debris deposited by the documents
• A check scanner "cleaning card" can be run through the scanner
to perform a "rapid cleaning" process
As needed, use the check scanner
cleaning card to clean/ clear the
track
•
A more detailed cleaning of the scanner may be necessary if
the cleaning card does not provide suitable results
8227 4738-001 April 2013
8227 5002-000 January 2014
SmartSource Micro Elite – Access and Maintenance
Track
Cover
Recommended Track Cleaning Procedure
Open both of the scanner covers
Check the paper path and
remove all bits of paper,
paper dust, paper clips, and
staples from the track
Use a Micro-duster to blow air
along the track to clean the paper
path
Page 3 of 16