Using An Sd Card; Setting Language; Setting Date, Time, And Region - BenQ DC T700 User Manual

4 Preparing the camera for use

Using an SD card

The camera comes with internal memory for storing captured images, video clips, or audio
files. You can also add an SD (Secure Digital) card to store more files.
Before initial use of an SD card, press
first. Remember to slide the write-protect tab (on the side of the SD card) to the unlock position.
Otherwise, all data (if any) on the SD card is protected and the card cannot be formatted.

Setting language

This is to select the language version to show on the screen.
To select a language:
1. Press ,
2. Tap >

Setting date, time, and region

When first time using the camera or the camera battery has been removed for a long time,
you need to set the date, time, and where you are located.
To set date, time, and region:
1. Press .
2. Tap >
3. Tap OK.
4. Tap Date or Time, and then tap
5. Tap OK.
6. Tap OK, and then tap World Time.
7. Tap , and then tap
closest to where you are.
8. Tap DST to set daylight saving time as needed.
9. Press to exit.
• If you also set the destination city, you can tap Select Time to display and record using
the date and time at hometown or destination.
• When you select to use the date and time at destination (useful when you travel there),
an aircraft icon
To install an SD card:
1. Make sure the camera is turned off.
2. Open the battery/SD card cover.
3. Insert an SD card in the correct direction.
4. Close the battery/SD card cover.
To remove an SD card:
1. Make sure the camera is turned off.
2. Open the battery/SD card cover.
3. Press lightly the edge of the SD card to eject.
4. Close the battery/SD card cover.
, and tap a language (tap
> Date Style, and then tap
/
/ or directly press a point on the map to choose a city
will show beside the date and time on the screen.
and tap >
/ to find more languages as needed).
/ to choose preferred formats.
to choose correct date or time.
to format the card