Installation
2
2 Installation
Mounting
Installing the
thermostat
6 | 30
Siemens Industry, Inc.
Smart Infrastructure
●
The thermostat is designed for wall mounting.
●
The recommended height is 5 feet above the floor.
●
Do not mount the thermostat in recesses, shelves, behind curtains or doors,
or above or near heat sources.
●
Avoid direct exposure to sun and drafts.
●
Seal the conduit and/or wall opening, as drafts can affect sensor readings.
●
Observe maximum ambient conditions.
1. Switch off power to the heating/cooling system at the breaker or system
power switch.
2. Remove the old thermostat from the wall with wires still connected.
3. Using the provided wire decals , label the existing wire connections. It is also
helpful to take a picture of the current wire connections for subsequent
reference.
A6V11727391
06/20/2019