Table of Contents
Advertisement
Using in PC monitor mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 9).
Choosing PC mode
Press the
button on the remote control to switch the TV to PC mode.
PC
Press the
button to return to TV mode.
TV
If there is no PC signal for more than five seconds, the TV automatically goes into standby mode.
Using the PC menus
TV Menu
Picture
Sound
Features
Install
π
Mode
PC menu
Picture π
Audio selection
Features
Factory Preset
Mode
Features
Phase
Clock
Format
PIG
Auto Adjust
TV
PC
HD
Brightness
Contrast
Horizontal
Vertical
Color Temp.
Press the
button to access the specific settings of
MENU
the PC monitor mode. Use the cursor buttons to adjust
them (the settings are automatically saved).
Picture
•
Brightness/Contrast
contrast.
•
Horizontal/Vertical
vertical placing of the image.
•
Color Temperature
or warm).
Audio selection
To choose the sound reproduced on the TV
(
or
).
PC/HD
TV
Note:
- You must choose TV mode before going to TV/HD mode.
- To listen to the sound from a HD device in PC mode, take
care you also connected the audio cables to the HD device.
Features
•
: eliminates the horizontal (
Phase/Clock
vertical (
Clock
) interfering lines.
•
: to choose between large screen (
Format
or the original (
Native
•
: change the Size and Position of the PIG window on
PIG
the screen when the
is used.
•
: Position is set automatically.
Auto Adjust
Factory Preset
To return to the factory settings
Mode
To come back to TV mode.
: to adjust the brightness and
: to adjust the horizontal and
: to adjust the colors (cool, normal
Phase
) format of the PC screens.
button on the remote control
PIP
) and
)
Fullscreen
13
Advertisement
Table of Contents
