Table of Contents
Advertisement
NIR Thermal Imager
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Page 8
2)
The easiest way to disassemble the 3-pin
AC input connector is to first screw the
connector assembly onto the input socket
(Fig. 8).
3)
Grip the rear section of the input connector
and unscrew it from the Power Supply Unit
(Fig. 9).
The connection terminals inside the input connec-
tor will now be revealed (Fig. 10).
4)
Unscrew the connector front section from
the Power Supply Unit and disassemble the
remaining parts of the connector.
5)
Slide the rear locking ring, gasket and shell
body over the mains input cable.
6)
Strip back the mains cable wires to the
appropriate lengths and connect them to
the Input connector terminals (Fig. 11) as
per the wiring schedule below:
Pin 1 = Live
Pin 2 = Neutral
Pin 3 = N/C
E = Earth
Installation Guide
Advertisement
Table of Contents
