Viewfinder Indications - Contax S2 Instruction Manual

When the release button is pressed halfway, the preset
shutter speed blinks and the correct shutter speed lights.
A power-saving circuitry design has been utilized for the
camera's electronic minimize battery consumption.
The vievufinder LEDs go out automatically 16 seconds
after you remove your finger from the shutter
release button.
. When developing film in standard size prints, the
prints will be slightly narrower than full-negative size.
a. Dedicated electronic "flash ready" indication
b. Shutter speed overexposure warning
c. Shutter speed LED
d. Shutter speed underexposure warning