Battery Charger; Battery Installation - Signode GRIPPACK Original Operation, Parts & Safety Manual

BATTERY INFORMATION & CHARGING
Plug charger into your standard power outlet.
With no battery pack inserted, the charger's green
indicator light will go ON. This indicates the charger
is receiving power and the charger is ready for
operation.
When you insert the battery pack into the charger.
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is receiving
a fast charge.
When the indicator light stops "BLINKING" (and
becomes a steady green light) fast charging is
complete. The battery pack is fully charged and can
be removed from the charger.
The battery pack may be used even though the light
may still be blinking. The light may require more
time to stop blinking depending on temperature.
The purpose of the green light is to indicate that the
battery pack is fast-charging. It does not indicate
the exact point of charge. The light will stop
blinking in less time if the battery pack was not
completely charged.
When you begin the charging process of the battery pack, a steady red light could also mean the
battery pack is too hot or too cold.
Fast charging is only possible when the temperature range of the battery pack is between 32F (0C)
and 113F (45C). When needed, the internal fan of the charger will turn on to aid the charging
process and speed.
As soon as the battery pack reaches the correct temperature range, the battery charger will automatically
switch to fast charging.
Charger is plugged in and receiving power.
Battery is receiving a Quick Charge.
Battery is too hot or cold to receive charge. Charging
starts when the battery reaches the proper temperature.
Battery cannot accept a charge. Replace battery.
7