General Safety Instructions - Signode GRIPPACK Original Operation, Parts & Safety Manual

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY.
1. STRAP BREAKAGE HAZARD
Improper operation of the tool or sharp corners on the load can result in strap breakage during
tensioning, which could result in the following:
!
A sudden loss of balance causing you to fall.
!
Both tool and strap flying violently towards your face.
Failure to place the strap properly around the load or an unstable or shifted load could result
in a sudden loss of strap tension during tensioning. This could result in a sudden loss of
balance causing you to fall.
Read the tool's operating instructions. If the load corners are sharp use edge protectors.
Place the strap correctly around a properly positioned load.
!
Positioning yourself in-line with the strap, during tensioning and sealing, can result in
severe personal injury from flying strap or tool. When tensioning or sealing, position
yourself to one side of the strap and keep all bystanders away.
!
Using strap not recommended for this sealer can result in strap breakage during sealing.
Use the correct Signode products for your application.
2. TOOL CARE
Take good care of the tool. Inspect and clean it daily, lubricate it weekly and adjust when
necessary. Replace any worn or broken parts.
3. WORK AREA
Keep work areas uncluttered and well lighted.
4. FALL HAZARD
Maintaining improper footing and/or balance when operating the tool can cause you to fall. Do
not use the tool when you are in an awkward position.
5. STRAPPING
Several types of strap can be used with this tool. Use the correct Signode products for your
application. If you need help contact your Signode Representative.
6. CUTTING TENSIONED STRAP
Use only cutters designed for cutting strap; never use claw hammers, crowbars, chisels, axes
or similar tools. Such tools will cause the strap to fly apart with hazardous force. Before
using any Signode product, read its Operation and Safety Manual.
READ THESE INSTRUCTIONS CAREFULLY.
2