Table of Contents
Advertisement
The PC screen doesn't
show the "Copy in
progress" message
during a file copy. The
[SAVE] Led on Galileo
is blinking.
File copies from CD or
floppy disk are slow
Some files, stored in
the memory card, are
not showed by Galileo
Some MIDI, MP3 or
KAR files, stored in
the memory card, are
not showed by Galileo
After a memory card
format, some files are
still showed by Galileo
The "Removable disk"
icon is not displayed
by the PC, also if
Galileo is connected to
the PC and the
memory card is
inserted.
134
The file copy procedure is in
progress
Some delay could be
generated, and not caused by
Galileo, during a directly copy
from CD or FD.
These files are not compatible
with Galileo or have been
stored more than 512 files in a
folder
The file system of the memory
card is not refreshed
The file system of the memory
card is not refreshed
The PC has disabled the
drivers after a wrong
procedure.
It might happen that the
progress bars showed by the
operating system don't show
the right time required to
complete the operation.
Hovewer, write data is in
progress. Wait until the [SAVE]
Led is switched off.
Copy the CD or FD contents
into the hard disk if this type of
coping procedure is frequently
used
Wait for the file copy
completing (the [SAVE] Led is
switched off). If it doesn't work,
eject and re-insert the card
Wait for the file copy
completing (the [SAVE] Led is
switched off ). If it doesn't
work, eject and re-insert the
card
Re-start the PC checking that
Galileo is connected and that
the memory card is inserted.
Advertisement
Table of Contents
