Playing Back A Song - Voice Systems Galileo User Manual

PLAYING BACK A SONG

When the selected file is ready for the playback, the display shows the MIDI or MP3 "play
page".
MIDIFILE
metronome
tempo
FILE MP3
When the [PLAY] button is pressed, the LED will light up and playback of the song will
start.
When the [STOP] key is pressed the playback of the song stops and by pressing [PLAY]
again the playback is it temporarily interrupted and the unit enters a "Pause Mode" (Pause).
The pause mode is indicated by the flashing [PLAY] LED. By pressing [PLAY] again the
execution will restart from the pause point.
To load a new song, stop the playback by pressing [STOP] and then let the memory card
display its contents using, the [DIR] key, the [CURSOR] section buttons or the [DATA
ENTRY] encoder (only if headphones are not connected) and select the desired song.
To program the next song (that will be played automatically at the end of the current song),
after having displayed the memory card content, select the deired song with the [SELECT]
selected folder
measure
counter
selected folder
Beat-meter
selected song
elapsed time
selected song
89