Tempo (Change) Function - Voice Systems Galileo User Manual

which contains the following parameters:
• CHANNEL: It selects the one of the 16 tracks the mute is to apply to; in other words th
"signals "
• MODE: to select the MUTE mode:
- OFF: it showst hat the track is played the track is played
- HALF: it shows that the track is played at half volume
- ON: it shows that the track is muted
Press [ENTER] to activate the function or [ESC] to cancel the aborted operation.
In both cases the display will show the main video page.
If you wish to check and/or modify the Mute parameter while the function is active, press
and hold down the [MUTE] key.
To deactivate the mute function press the [MUTE] key (the led will switch off).

TEMPO (CHANGE) FUNCTION

The TEMPO function allows the user to vary the metronome tempo of a song being played.
By pressing the [TEMPO] button the Galileo display will show the following video page:
These are the configuration parameters:
• RATIO: It allows you to regulate the variation not in "absolute" tempo, but of a
recalculation percentage, to ensure proportional variation in the performance of the
song, features rallentados or accelerandos. If the ratio is set at 200%, the new tempo
will be twice the original one while if the ratio is set at 50%, the new tempo will be the
half.
• NEW: It displays the new tempo value.
• ORIGINAL: It displays the original tempo value.
Once the desired settings are made, press again [ENTER] to activate them.
If you wish to cancel the new values press [TEMPO] or [ESC].
In both cases the display will show back the main page.
If you wish to check and/or modify the Tempo parameters while the function is active,
press and hold the [TEMPO] key.
102