Voice Systems Galileo User Manual page 34

indicating that a List (not a single song), is really running.
Now press [PLAY] and Galileo will start the playback; once the song is terminated (by
itself or pressing [STOP]) the second song will be loaded and played, then the third one
and so on.
By pressing [STOP] for some seconds, it will be possible to stop in a definitive way the
LIST playback.
To verify or edit in every moment the list contents (also during the playback) press the
[LIST] key.
If you need to change the position of a song inside a list, select the desired song using the
encoder knob, and then select the new position with the [UP] and [DOWN] keys.
By pressing [SELECT], the selected song will be removed from the list.
To remove all songs from a list previously programmed, press and hold down the [LIST]
key. The display will show:
press [ENTER] to confirm or [ESC] to cancel.
NOTES
In the PLAY MODE section, you can edit the start mode of the songs programmed
in a list (see also "SONG PLAYBACK MODE").
The "LIST" field at the top right corner of the display is not shown if the list contains
just one song.
To learn more about the Galileo messages during song playback, please see also
"INFO MESSAGES" and "ERROR MESSAGES".
104