Table of Contents
Advertisement
Bolt pitch
• Positioning of holes for fastening to the wall
Unit:mm(inch)
Type
A
CEA, CEU
858(33-3/4)
CFA, CFU
1136(44-3/4)
1. Use the installationmount for installation. Check
whether the wall is strong enough to bear the
weight of the unit or not. if there is a risk, reinforce
the wall before installing the unit.
2. The unit requires a minimum 100 mm clearance on
the underside for air intake. Also, ensure the unit is
level when installed so that drainage flows smooth-
ly. If inclined, water can leak.
3. By a state of the wall, operating sound may
become bigger.
How to open/close front panel
• How to open/close the front panel
(1) Open the lid of control panel(Both left and right)
(2) Remove screws(Both left and right)
(3) Lift the front panel of the unit
• To close, perform the procedure in opposite
order.
A
(1)
(2)
(3)
Installation Manual 9
Installation
[Unit: mm(inch)]
(2)
(1)
Advertisement
Table of Contents
