Mute; Adjusting The Sound; Equalizer; Night Mode - Teufel Cinedeck Technical Description And User Manual

All-in-one cinema system with integrated subwoofers
Table of Contents

Advertisement

Mute

– By tapping the
button (18), you
can switch the sound off and back
on. The word "MUTE" will appear
on the display (16) during muting.
– The volume can also be adjusted to
activate the sound.

Adjusting the sound

You can adjust the sound in two
ranges:
• BASS – low tones, set with the
BASS button (31).
• TREBLE – high tones, set with the
TREBLE button (23).
1. Push the corresponding button.
The selected range "Bass" or
"Treble" will appear briefly on the
display (16). Afterwards, you will
see the current setting.
2. Set the desired value within a
range from "–10 dB" (decrease)
to "+10 dB" (increase) with the
buttons + (19) and – (20).
3. Finish by pushing the button
(33).
– The device will return to normal
operation after three seconds of
button inactivity.
You can also make the same setting
on the menu (see "Sound" menu on
page 21).

Equalizer

Push the MODE button (24) to select
the five predefined sound patterns:
• Normal: Unchanged sound.
• Voice: Clear sound for messages
and magazines.

Night mode

Low frequencies are decreased and
the overall level is compressed to
aviod disturbing the sleep of unin-
volved persons as much as possible.
– Tapping the button
night mode on and off. In active
night mode, the notice "Night" will
appear on the display (16).

Dynamore

®
®
Dynamore
is a technoligy developed
by Teufel, which virtually extends the
stereo panorama compared to the
actual dimensions of the device.
Additionally, if a multichannel signal (e.g.
DD/ DTS) is detected, rear channels will
be emitted by the side-firing speakers.
This generates an impressive, immer-
sive and wide-ranging sound."
Use the
button (22) to switch
®
Dynamore
on or off.
Dolby Audio and Dolby
mode
When playing back Dolby Audio or
DTS encoded multi-channel tracks,
the message "Dolby Audio" or "DTS"
will light up in the display (16) for
three seconds.
If you have activated the upmix func-
tion (see „Advanc. - Advanced Sound
Settings" on page 21) and a stereo
signal is played, the display shows
"Dolby Pro Logic II".
• Cinedeck
(17) switches
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cinebar ultima

Table of Contents