Table of Contents
Advertisement
• AutoOn – Set AutoOn for each
Source
For every input (TV, HDMI, AUX,
Optical, BT, USB), you can switch
automatic activation on and off here
(see also page 17).
For the analogue source "AUX", you
can adjust the sensitivity from which
the automatic activation function
is to recognise an audio signal at
the analogue input AUX IN (11) and
switch the Cinedeck on from standby:
Off (no AutoOn),
Minimal (only at a high input level),
Low, Mid, High,
Maximal (already at a low input
level).
Softw. - Software Information and
Update
• Vers. [Value]
• Update – Start Update Mode
These menu items are intended for
the software update (see „Software
Update" on page 30).
Info
Displays the current system param-
eters: Current volume (or mute),
Current input source, Stream type
(PCM, DD 2.0, DD 5.1), Tone Settings,
Active sound mode (e.g. Dynamore
Center), Software Version.
24
• Cinedeck
Reset – Perform System Reset
Here, you can reset some or all
parameters to the default settings.
• BT – clear the list of known
Bluetooth
®
devices.
• Wirel. – clear the list of connected
wireless speakers (rears and
subwoofer).
• Full – reset all parameters to the
factory settings.
After selecting one of these items the
question "Reset?" appears.
– Press the the button
(33) or /
(13) to perform
the reset.
– To abort, press the button
or
/ (14).
After a full reset, the Cinedeck
restarts.
(35) or
(32)
Advertisement
Table of Contents
