Toshiba Flat Panel Television Owner's Manual page 40

Switching the main and POP pictures
Press SWAP while you are using the POP feature to switch the main
and POP pictures.
Freezing the POP picture
1. Press FREEZE while the POP is not on the screen.
The POP window will appear with a still picture.
2. Press FREEZE again to renew the still picture.
To erase the still POP window:
Press EXIT.
I
Still picture
Adjusting the size of the double-window
When the input signals of the main and POP pictures are 480i, you
can adjust the size of each window. Continuously pressing _1or •
changes the size in 9 steps.
EXIT
WAP
Note:
If the signal format other than 4801is
received, this feature is not available "Not
available" will appear on the screen.
<
I I
<I I•
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON Plasma display
Avoid displaying stationary images on
your Plasmadisplay for extended periods
of time. Fixed (non-moving) images
(such as still PIP/POPwindows or blacW
gray bars in 4:3 screen picture or PiP/
POP formats) can become permanently
engrained in the Plasmadisplay.This
type of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse.See item 33 on page 4.
4O