Video) And A Vcr - Toshiba Flat Panel Television Owner's Manual

Connecting a DTV receiver/set-top box with
ColorStream ® (component video} and a VCR
This connection allows you to watch DTV (digital TV broadcast),
VCR, and TV programs, and record DTV and TV programs. You can
record from one source while watching a program from another
source.
Your TV has ColorStream ® (component video) inputs. Connecting
your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
From
Antenna Stereo VCR
Note:
For the highest possiblepicture quality,use
component video cables Cora DVl D digital
single link cable] between the TVand DTV
receiveL
Youcan connect component video cables
from the DTV receiver to either set of
CelorStream terminals on the TVCHD I or
HD 2].
The ColorStream HD l and HD_ terminals
can be used with ProgressiveC480p,720p]
and Interlaced C480_ lO80i) seansystems.
#your DTV receiveris not compatible
wi_l component video CorDVI/HDCP], use
an S video cable Cplus an audio connection]
insteac_
Torecord from the DTV receiver,set the VCR
to Line IN. Tomonitor recording from the DTV
receiver,set the VCRto Line IN and the 7V to
VIDEO 1
Theunauthorizedrecording, use, distribution, I
or revision of television programs, videotapes, ]
DVDs, andother materials is prohibitedunder ]
the CopyrightLawsof the UnitedStates and ]
othercountries,and may subjectyonto civil ]
andcriminal liability. I
From
DTV Antenna
14