Connecting Two Vcrs; Connecting A Camcorder - Toshiba Flat Panel Television Owner's Manual

Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You also can record one
channel while watching another channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
VCR1
From Antenna
TV
Note:
If you have VCRswit/?S video,use S video
cables insteadof standard video cables.Do
not connect both a standard video cable and
an S video cable to VIDEO 7 CerVIDEO 2) at
the same time, or the picture performance
will be unacceptable.
De not connect the same VCR to t/?eoutput
and input terminals on the TVat the same
time.
Todub or edi_ VCR2 must select Line/IV,,
and the TVmust select VIDEO 7.
* Tl?eVideoOUTterminalsdeesneteutput
the POP picture.
** TheAudio OUT terminalscan output t/?e
sound of either the Main or POPpicture
Csee"Selecting the Audio OUT sound" of?
page 59)
II EII
:N
VCR2
J The unauthorized recording, use, distribution, J
or revision oftelevision programs,videotapes,
OVDs,and other materials is prohibited under
the CopyrightLaws ofthe United States and
othercountries,and may subjectyouto civil
andcriminal liability.
Connecting a camcorder
This connection allows you to watch video materials recorded on a
_mcorder.
You will need:
• one set of standard A/V cables
Note:
If you have a camcorder with S video, use an
S video cable instead era standard video
cable. Do not connect bet/?a standard video
cable and an S video cable at the same time,
or the picture performance will be
unacceptable
Video-3 (front panel)
15